Groundsman Industries
 

Solid & Needle Tines


Solid and Needle Tines are manufactured from high tensile steel which is hardened then tempered just enough to relieve any brittleness to achieve the maximum wear qualities. The taper on the working diameter is designed to minimise exit suction and thereby surface lifting.
5/8'' Solid Tines

Normally used in Twin tine holders. Soft to medium areas in need of drainage. Maximum depth spiking producing quite a large hole at 3" centres. Please note: This tine is not recommended for compacted surfaces.

Part No: GTS58      Socket Size: 5/8"      Overall Length: 5 1/2"




5/8'' Solid Tines Long

Normally used in Twin tine holders. Soft to medium areas in need of drainage. Maximum depth spiking producing quite a large hole at 3" centres. Please note: This tine is not recommended for compacted surfaces.

Part No: GTS58L      Socket Size: 5/8"      Overall Length: 6 1/2"




1/2'' Solid Tine

Normally used in Twin holders, for maximum, penetration in compacted surfaces. General purpose spiking for areas in need of aeration and drainage.

Part No: GTS12      Socket Size: 5/8"      Overall Length: 5 1/2"




1/2'' Solid Tine Long

Normally used in Twin holders, for maximum, penetration in compacted surfaces. General purpose spiking for areas in need of aeration and drainage.

Part No: GTS12L      Socket Size: 5/8"      Overall Length: 6 1/2"




7/16'' Solid Tine

Normally used in Triple holders (" sck.) For year round spiking and surface drainage with minimal surface disruption. This tine can also be effective in Twin Holders for heavily compacted areas.

Part No: GTS76      Socket Size: 1/2"      Overall Length: 5"




7/16'' Solid Tine Long

Normally used in Triple holders (" sck.) For year round spiking and surface drainage with minimal surface disruption. This tine can also be effective in Twin Holders for heavily compacted areas.

Part No: GTS716L      Socket Size: 1/2"      Overall Length: 6"




3/8'' Solid Tine

Normally used in Quadra holders. The 3/8" solid tine is the thickest in the micro-tine category. Durable yet fine enough to perform year round aeration and improve drainage without disturbing play.

Part No: GTS38      Socket Size: 1/2"      Overall Length: 4 3/4"




3/8'' Solid Tine Long

Normally used in Quadra holders. The 3/8" solid tine is the thickest in the micro-tine category. Durable yet fine enough to perform year round aeration and improve drainage without disturbing play.

Part No: GTS38L      Socket Size: 1/2"      Overall Length: 5 3/4"




5/16'' Needle Tine

Normally used in quint tine holders for close pattern spiking through out the summer. Regular use is recommended, especially effective immediately before treatments such as fertilisation. Also available in clusters

Part No: GTS516      Socket Size: 1/2"      Overall Length: 4 1/2"




5/16'' Needle Tine Long

Normally used in quint tine holders for close pattern spiking through out the summer. Regular use is recommended, especially effective immediately before treatments such as fertilisation. Also available in clusters

Part No: GTS516L      Socket Size: 1/2"      Overall Length: 5 1/2"




1/4'' Needle Tine

Normally used in quint tine holders for summer aeration on fine turf with little trace on the surface. Use often for maximum effect especially throughout the growing season. Also available in clusters.

Part No: GTS14      Socket Size: 1/2"      Overall Length: 4 1/2"




1/4'' Needle Tine Long

Normally used in quint tine holders for summer aeration on fine turf with little trace on the surface. Use often for maximum effect especially throughout the growing season. Also available in clusters.

Part No: GTS14L      Socket Size: 1/2"      Overall Length: 5 1/2"




 

< Previous Page