Cluster Tines

DESCRIPTION :

Cluster of 5/16"or 3/8" Hollow Tines

PART NO :

8SD516

8SD38

AERATION PATTERN :

1 ½" x 1 ½" (64 - sq./ft)

(38mm X 38mm)

DEPTH RANGE :

½" - 2 ½"

RECOMMENDED USE :

Use for very close pattern Micro Hollow Tining at medium to shallow depth to enhance surface drainage while relieving surface compaction. Very effective also for thatch removal and in preparation for over - seeding.

DESCRIPTION :

Cluster of Eight Needle Tines

PART NO :

8S516

8S14

SPIKE DIAMETER :

5/16" & ¼" (needles)

AERATION PATTERN :

MAX DEPTH :

2" - 2 ½"

DESCRIPTION :

Cluster of Ten Solid & Hollow Tines

PART NO :

10S516

10SD516

SPIKE DIAMETER :

5/16"

AERATION PATTERN :

1 ¼” X 1 ¼” (100 - sq./ft.) (30mm X 30mm)

DEPTH RANGE:

1/4" - 1 "

RECOMMENDED USE :

Use for very close pattern Micro Hollow Tining at shallow depth for thatch removal and in preparation for over - seeding.

DESCRIPTION :

Cluster of Ten Solid Needle Tines

PART NO :

10S14

SPIKE DIAMETER :

¼”

AERATION PATTERN:

1 ¼” X 1 ¼”  (100 - sq./ft.) (30mm X 30mm)

DEPTH RANGE:

1” - 2”

RECOMMENDED USE:

Produces precision depth Needle Tining at a very close pattern for a Sorrell Roller effect for surface drainage or over - seeding.

DESCRIPTION :

Cluster Head Mounting Flange with Spigot-clamp type mounting

PART NO :

GSCMF

DESCRIBED USE :

Used for mounting Cluster Heads to machines accepting the spigot-clamp type fitting (i.e. The HD Range).

DESCRIPTION :

Cluster Head Mounting Flange with Draw-bolt type mounting

PART NO :

GDBMF

DESCRIBED USE :

Used for mounting Cluster Heads to machines accepting the draw-bolt type fitting (i.e. The MD Range).