Side Discharge Tines

DESCRIPTION :

5/16" SD Hollow Tine

PART NO :

GTSD516

SOCKET SIZE :

½"

OVERALL LENGTH :

4"

RECOMMENDED USE :

Normally used in Quint or Quadra Tine Holders producing a 1 3/8" x 1 3/8" or 1 ½" x 1 ½" hole pattern respectively and up to 2 ½" deep. Year round aeration with thatch removal or preparation for over seeding. Dispersible miniature cores.

DESCRIPTION :

3/8" SD Hollow Tine

PART NO :

GTSD38

SOCKET SIZE :

½"

OVERALL LENGTH :

4 ¾"

RECOMMENDED USE :

Normally used in Quadra or Quint Tine Holders but can also be used on Triples for harder more compacted surfaces or if the wider hole pattern is desirable. Produces a small core to a maximum depth of about 3". Minimal disruption coring for surface compaction relief or thatch removal. Also effective for over-seeding.

DESCRIPTION :

½" SD Hollow Tine

PART NO :

GTSD12

SOCKET SIZE :

5/8"

OVERALL LENGTH :

5 ½"

RECOMMENDED USE :

Normally used in Triple holders for Greens if conditions are not too compacted. Use Twin holders for Tee boxes and approaches etc. or Cricket-tables where conditions are harder and maximum depth is desirable. Medium soil removal to depths of 3 ½" to 4" Maximum.

DESCRIPTION :

5/8" & ¾" SD Hollow Tine

PART NO :

GTSD58

GTSD34

SOCKET SIZE :

¾"

7/8"

OVERALL LENGTH :

5 ¾"

6 3/8"

RECOMMENDED USE :

Normally used in Twin Holders producing a 3" x 3" hole pattern at depths of 4" to 4 ½" maximum. Spring and autumn general purpose aeration of compacted areas. Large core size with moderate to severe soil removal. GTSD34 Jumbo Tine is normally used on fairways or on areas where extreme soil exchange is desired.