Turf Retainers

Rack

The Rack is required if Turf Retainer are to be used. It consists of a box section member which attaches to the roller leg bracket on the 8120 and 12180 Tractor Mounting Turf Aerators. This rack spans the width of the machine just in front of the roller. Spring loaded brackets extend over the roller rearwards onto which the Turf Retainer Holders are bolted in pairs. This system allows the retainers to follow the contours of the surface while maintaining a constant pressure on the turf to prevent lifting.The rack is supplied with Blank Retainer Holder Flanges to keep the clamp bolts secure when retainers are not being used.

TURF RETAINER HOLDERS TRH & TRHW

Turf Retainer Holders are required to hold the plastic retainer sections. One wide holder is required in each set. The model 8120 machine requires 8 retainers ie: 7 standard and 1 wide. The model 12180 machine requires 12 retainers ie: 11 standard and 1 wide. The Holders have a bolted bottom plate which clamps the plastic retainers to the holder body. The Holders are universal accepting Twin Triple Quad and Quint Retainers. As with the Tine Holders, it is a good idea to have  set of Holders for each set of Retainers for convenience.
 

TWIN TR2 & TR2W

Twin Turf Retainers can be used with all Twin Holders no matter which Tine is being used. One wide retainer TR2W is required with each set, it is always fitted to to extreme left of the machine as viewed from the rear. There are seven standard and one wide retainer in the model 8120 and eleven standard and one wide retainer in the  model 12180 Turf Aerator machine.

TRIPLE TR3 & TR3W

Triple Turf Retainers can be used with all Triple Holders no matter which Tine is being used. One wide retainer TR3W is required with each set, it is always fitted to to extreme left of the machine as viewed from the rear. There are seven standard and one wide retainer in the model 8120 and eleven standard and one wide retainer in the  model 12180 Turf Aerator machine.

QUAD TR4 & TR4W

Quad Turf Retainers can be used with all Quad Holders no matter which Tine is being used. One wide retainer TR4W is required with each set, it is always fitted to to extreme left of the machine as viewed from the rear. There are seven standard and one wide retainer in the model 8120 and eleven standard and one wide retainer in the  model 12180 Turf Aerator machine.

QUINT TR5 & TR5W

Quint Turf Retainers can be used with all Quint Holders no matter which Tine is being used. One wide retainer TR5W is required with each set, it is always fitted to to extreme left of the machine as viewed from the rear. There are seven standard and one wide retainer in the model 8120 and eleven standard and one wide retainer in the  model 12180 Turf Aerator machine.